Visit Open-E website
Results 1 to 3 of 3

Thread: Suggestion Needed.....

  1. #1

    Question Suggestion Needed.....

    Hi,Friends
    I am new to this forum and need some help from you all.I have purchased new machine at my place but the problem is that suddenly my machine got hanged initially it got started and my antivirus was getting updated and suddenly it crashed down it was just as if it got hanged all things came to stand still.I tried to restart the machine and a message appeared :-
    Windows could not start because following file is missing or corrupt:
    \WINDOWS\SYSTEM32|CONFIG\SYSTEM

    You can attempt to repair this file by restarting Windows Setup using the original Setup CD-ROM
    Select 'r' at the first screen to start repair.

    But no use friends I have tried this too.What to do now?
    Do I have to Format my machine?
    Please help!!!

  2. #2

    Default

    Do you have open-e software on USB DOM or CD ?
    You will need to set in bios to boot from correct device.
    The open-e software will want to format you disk drive.

  3. #3

    Talking

    Quote Originally Posted by toepytoe
    Do you have open-e software on USB DOM or CD ?
    You will need to set in bios to boot from correct device.
    The open-e software will want to format you disk drive.
    Friend please help me out to i am facing
    Hi,
    I need a help friends I am afraid my machine gets too hot after working for 9-10 hours continuously.Some of the IC's may get melted,can you guys suggest me some alternative method to protect those IC's .Actually my service provider asked me get those IC's changed in order to avoid my machine getting crashed.Can there any way to avoid such accident as this is 3rd time that I will be changing my IC's.What must be the problem?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •