Quote Originally Posted by To-M
Are both NIC's for the Replication and Targets have the Auxiliary connection enabled. This is in SETUP -> Network -> iSCSI Failover -> Function: Auxiliary connection

Also check that the Volume Replication is completed successfully in Status > Tasks.
the Auxiliary connection is activated on all NICs
the replication tasks are all completed successfully,

but still the same error.
when I activate the failover-function the information says:
Code:
Information
System has automatically selected interface bond0
bond0 are the nics to the LAN (192.13.47....)

as primary/secondary node I took the IPs from the replication bond (192.168.6....)