iScsi Auto Failover

[To-L]

Hi juelz

Did you enter the correct mirror IP address for primary and secondary server?
CONFIGURATION -> Volume Manager -> Vol. replication -> Function: Mirror server IP

On all 4 NIC's have you enabled
Use this network interface to communicate between the nodes.
in SETUP -> Network -> iSCSI Failover -> Function: Auxiliary connection.

[juelz]

Hi juelz

Did you enter the correct mirror IP address for primary and secondary server?
CONFIGURATION -> Volume Manager -> Vol. replication -> Function: Mirror server IP

On all 4 NIC's have you enabled
Use this network interface to communicate between the nodes.
in SETUP -> Network -> iSCSI Failover -> Function: Auxiliary connection.

Hi,

replication works perfectly. The status on both volumes is "consistent".

I enabled the "Auxiliary connection" for all NIC's, but I still get the error.
On the primary host it says:

Global status
  	Service running 	inactive
  	Node status 	inactive
  	Ping node 	ok
Communication via:
  	bond0 	unknown
  	eth3 	unknown
  	eth0 	unknown
  	eth1 	unknown
  	eth2 	unknown