iScsi Auto Failover

[ottl05]

Are both NIC's for the Replication and Targets have the Auxiliary connection enabled. This is in SETUP -> Network -> iSCSI Failover -> Function: Auxiliary connection

Also check that the Volume Replication is completed successfully in Status > Tasks.

the Auxiliary connection is activated on all NICs
the replication tasks are all completed successfully,

but still the same error.
when I activate the failover-function the information says:

Information
System has automatically selected interface bond0

bond0 are the nics to the LAN (192.13.47....)

as primary/secondary node I took the IPs from the replication bond (192.168.6....)

[To-M]

Email me and I will send you a step by step document. It looks as though the secondary has issues. Make sure you have the latest version that was just released this week.

[ottl05]

Email me and I will send you a step by step document. It looks as though the secondary has issues. Make sure you have the latest version that was just released this week.

email is underway

[ottl05]

with the help of Todd, the failover is now working :-)