I'm trying to connect my SAN via fibre direct-attached to my media server but I can not see the LUN on my media server.

I'm using 2 Emulex LP9002 HBA cards (FL-AL), no switches.

Are the Emulex LP9002 cards compatible with open-e dss or do I need qlogic hba cards?

----------------------------------------------------------
- 24TB @ raid 6
- new FC volume -> block size 512 bytes, Initialize(checked)


- Configuration -> FC Target Manager:

Warning: No Fibre Channel Host Bus Adapter found. All Groups and HBAs settings will be saved but will have no functionality until you plug in appropriate HBA card.



- Setup -> Fibre Channel:
Info
No Fibre Channel controllers found


- Status -> Hardware:

Fibre Channel controllers
Emulex Corporation LP9000 Fibre Channel Host Adapter
Emulex Corporation LP9000 Fibre Channel Host Adapter


Model: OEM Storage Server
Version: 5.0.DB44000000.3025
Release date: 2008-02-27
Licensed Storage Capacity: 24 TB
-----------------------------------------------------------------------

Thanks