Server Crash

[aggiandrew]

I dont think i explained my problem correctly in my previous point.

I copy one file over to the open-e server, while this is being copied over i try to copy a second file over to the open-e server at the same time, during this process the first file comes up with an error message "File cannot be copied media has been removed". The second file continues and completes copying to the open-e server. When looking on the open-e server i was still able to see both files on the server but the first file was unaccessible.

[aggiandrew]

NIC config

static
IP 192.168.1.121
sub 255.255.255.0
gateway 192.168.1.3 same as router gateway

dns setting from my iISP

routing none

[To-L]

What type of switch do you have.
Did this happen with all network cards?
How fast is the nic in the system now ?

[aggiandrew]

What type of switch do you have.
Did this happen with all network cards?
How fast is the nic in the system now ?

I am having this issue on all network cards. I am using a Netgear DS108 switch which runs on 100 half dimplex. The client PC's nic is set on auto. I will change this too 100 half dimplex and see if that works.

I am using software RAID 1 this is configured through Open-e lite, i have only enabled SMB and setup NAS volumes. I am not using ISCSI Protocal.

The error message i am getting now is "The specified network name is no longer available."

Cheers Aggi

[aggiandrew]

I am having this issue on all network cards. I am using a Netgear DS108 switch which runs on 100 half dimplex. The client PC's nic is set on auto. I will change this too 100 half dimplex and see if that works.

I am using software RAID 1 this is configured through Open-e lite, i have only enabled SMB and setup NAS volumes. I am not using ISCSI Protocal.

The error message i am getting now is "The specified network name is no longer available."

Cheers Aggi

Just to let you know i changed the duplex and it did not help.

[aggiandrew]

I have reconfigured everything and started a fresh (Yet again). I have now noticed that if you test the open-e server with the client PC on auto duplex I would get an error. Even bringing it down to half duplex which is the same speed from the switch, it would come up with the same error message. "Networkname is no longer available ".

This time i have configured the server from a fresh install and tested from the client PC set at half duplex, it now works fine. Is this a work around or is my NIC card not compatable?

Thanks to everyone who has helped me.

[symm]

try with DNS off