Server Crash

[aggiandrew]

What type of switch do you have.
Did this happen with all network cards?
How fast is the nic in the system now ?

I am having this issue on all network cards. I am using a Netgear DS108 switch which runs on 100 half dimplex. The client PC's nic is set on auto. I will change this too 100 half dimplex and see if that works.

I am using software RAID 1 this is configured through Open-e lite, i have only enabled SMB and setup NAS volumes. I am not using ISCSI Protocal.

The error message i am getting now is "The specified network name is no longer available."

Cheers Aggi

[aggiandrew]

I am having this issue on all network cards. I am using a Netgear DS108 switch which runs on 100 half dimplex. The client PC's nic is set on auto. I will change this too 100 half dimplex and see if that works.

I am using software RAID 1 this is configured through Open-e lite, i have only enabled SMB and setup NAS volumes. I am not using ISCSI Protocal.

The error message i am getting now is "The specified network name is no longer available."

Cheers Aggi

Just to let you know i changed the duplex and it did not help.

[aggiandrew]

I have reconfigured everything and started a fresh (Yet again). I have now noticed that if you test the open-e server with the client PC on auto duplex I would get an error. Even bringing it down to half duplex which is the same speed from the switch, it would come up with the same error message. "Networkname is no longer available ".

This time i have configured the server from a fresh install and tested from the client PC set at half duplex, it now works fine. Is this a work around or is my NIC card not compatable?

Thanks to everyone who has helped me.

[symm]

try with DNS off