VMWare ESX 3.5 config...

[toepytoe]

You will need to have file I/O to work with Vmware and when creating the luns vmware does not like lun0 so use lun 1 or 2

Regard bonding it can be done in different interfaces: balance-rr (Round-Robin), active-backup, balance-xor, broadcast, 802.3ad and balance-tlb.

You may want to test to see which will work to best for you

[SeanLeyne]

You will need to have file I/O to work with Vmware and when creating the luns vmware does not like lun0 so use lun 1 or 2

I afraid this doesn't answer my question -- File I/O means CIFS or NFS, iSCSI means Block I/O.

I have never heard of iSCSI with File I/O.

[To-L]

SeanLeyne you are correct
check out this post
http://forum.open-e.com/showthread.p...ght=File+I%2FO

[rwmevarts]

Thanks all, helpful stuff here.

- Max

[SeanLeyne]

SeanLeyne you are correct, check out this post http://forum.open-e.com/showthread.p...ght=File+I%2FO

Thanks for the link, I had read it at the time.

Although we only started using Open-E last November, I had made a deliberate effort to read many of the historical postings back to Jan 2007, and all new posts to the iSCSI-R3 and this forum.

I always want to know the background/ugly details of all products that my firm uses, this way I can have a sense of what is a problem vs. what is a real problem.

Thanks again.