Visit Open-E website
Results 1 to 5 of 5

Thread: Open-E status messages

  1. #1

    Default Open-E status messages

    hello, running open-E R3 on Intel (SSR212MC2R) dual quad core processor, 4 gig ram, 5 x 300g SAS drives) four drives are R5 and the fifth is a hot spare.
    Getting bursts of error messages in the status log as follows:
    Within a few minutes got 33 of CMND_RX_START (1636 1 9318XX-4, the XX number increments through the messages. Also withing the same few minutes there were 35 of CHECK_CMD_SN (537) SEQUENCE ERROR (9318xx, 9318A6) again the xx number increments for each message. Then a couple of minutes later there was 1 of EXIT_TX (425) 4072 1 -104 and one of WRITE_DATA_ERROR (411) error -104 @ 0xf010037010040:1

    Version is 3.21 DB0000000.2863, rel date 2007-09-27

    I'm downloading the latest version at present, but wondering if these messages are indicative of a potential disk failure. We've had one disk fail so far, and the hot spare picked up perfectly.

    thanks
    Peter

  2. #2

    Default

    Dude... what is this error message...

    It looks like drive.. check your RAID card!!! how old is your system-drive? update their firmware... I found that updates solve maaaaaaaaaaaaaaaany problems

    I recommend an upgrade.. ver 46 is stable.. I like it.....

    Update and let us know...

  3. #3

    Default

    Sorry I entered the version number incorrectly -
    it's Ver 2.32.DB00000000.2863 Rel date 2007-09-27
    All the other numbers were correct.

    Joey, RAID card is Intel RAID Controller SRCSAS144e - standard with this system.

  4. #4

    Default

    Updated tonight to ver 5.0.IE46000000.3090 - will see what that does for it.

    Also, has anyone found what causes the Windows system event log entries - iSCSIPrt event 9 and 27?

  5. #5

    Default

    Didn't fix it. Same errors are being logged.
    Will try e-mailing support@open-e.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •