hello, running open-E R3 on Intel (SSR212MC2R) dual quad core processor, 4 gig ram, 5 x 300g SAS drives) four drives are R5 and the fifth is a hot spare.
Getting bursts of error messages in the status log as follows:
Within a few minutes got 33 of CMND_RX_START (1636 1 9318XX-4, the XX number increments through the messages. Also withing the same few minutes there were 35 of CHECK_CMD_SN (537) SEQUENCE ERROR (9318xx, 9318A6) again the xx number increments for each message. Then a couple of minutes later there was 1 of EXIT_TX (425) 4072 1 -104 and one of WRITE_DATA_ERROR (411) error -104 @ 0xf010037010040:1
Version is 3.21 DB0000000.2863, rel date 2007-09-27
I'm downloading the latest version at present, but wondering if these messages are indicative of a potential disk failure. We've had one disk fail so far, and the hot spare picked up perfectly.
It looks like drive.. check your RAID card!!! how old is your system-drive? update their firmware... I found that updates solve maaaaaaaaaaaaaaaany problems
I recommend an upgrade.. ver 46 is stable.. I like it.....