Visit Open-E website
Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12

Thread: Link 1 iSCSI Target and Volume to many servers

  1. #11

    Default oups

    forget about what I told you

    the fact was that I kept in mind Iscsi.

    but if you use jumbo frames and trunking (bonding), you will serve at the same speed that native iscsi (MTU : 9000) using NFS and so on....

  2. #12

    Default

    poulperouge

    Currently we do not have an option to format a target volume through DSS in GFS.

    To change the MTU for Jumbo Frames:
    From The console Press CTRL-ALT-W then select Tuning Options -> Jumbo Frames config then select the ethernet card that you want to change.
    Please note: your network must be able to support jumbo frames as well.

    I have seen instances where Jumbo frames and Bonding have been used at the same time

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •