Under "Status->Hardware" it lists "Adaptec 2200S (Vulcan)" under "RAID Controllers" in the upper part of the list.

Under "Drivers Info" it lists a whole bunch of entries: SCSI target core; iSCSI/TCP data-path; iSCSI library functions; iSCSI Transport Interface; Dell PERC2, 2/Si, 3/Si, 3/Di, Adaptec Advanced Raid Products, HP NetRAID-4M, IBM ServeRAID & ICP SCSI driver.

At the lower left of the GUI, the status is a green check-mark, which I presume means everything is okay.

Under SW RAID, there are no units found.

The firmware version on the card is Build 8205.

So is there some setting that I should have checked in the Adaptec RAID Configuration Utility that I access from the BIOS?

Thanks for your help.

Peter