dmesg, part 2 of 2:

Simple Boot Flag value 0x87 read from CMOS RAM was invalid
Simple Boot Flag at 0x7a set to 0x1
* This chipset may have PM-Timer Bug. Due to workarounds for a bug,
* this time source is slow. If you are sure your timer does not have
* this bug, please use "pmtmr_good" to disable the workaround
IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
audit: initializing netlink socket (disabled)
audit(1217076038.104:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
vesafb: framebuffer at 0xe8000000, mapped to 0xf8880000, using 1875k, total 131072k
vesafb: mode is 800x600x16, linelength=1600, pages=2
vesafb: protected mode interface info at c000:e4e0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fbsplash: console 0 using theme 'default'
fb0: VESA VGA frame buffer device
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
fb1: VGA16 VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 131072K size 1024 blocksize
loop: loaded (max 255 devices)
nbd: registered device at major 43
ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu>
ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu>
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0000 -> 0003)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 16
ICH4: chipset revision 1
ICH4: not 100% native mode: will probe irqs later
ICH4: neither IDE port enabled (BIOS)
Probing IDE interface ide0...
Probing IDE interface ide1...
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 17, io mem 0xfe500000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 18, io base 0x00001000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001020
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 16, io base 0x00001040
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-2: new high speed USB device using ehci_hcd and address 2
Initializing USB Mass Storage driver...
usb 1-2: configuration #1 chosen from 1 choice
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
usb 1-4: new high speed USB device using ehci_hcd and address 3
usb 1-4: configuration #1 chosen from 1 choice
usb 1-2.4: new low speed USB device using ehci_hcd and address 4
usb 1-2.4: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver hiddev
input: Logitech USB Receiver as /class/input/input0
input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.7-2.4
input: Logitech USB Receiver as /class/input/input1
input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.7-2.4
usbcore: registered new driver usbhid
/home/src/MF/kernel.org/trunk/drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
raid5: automatically using best checksumming function: pIII_sse
pIII_sse : 3455.000 MB/sec
raid5: using function: pIII_sse (3455.000 MB/sec)
raid6: int32x1 713 MB/s
raid6: int32x2 691 MB/s
raid6: int32x4 550 MB/s
raid6: int32x8 635 MB/s
raid6: mmxx1 2135 MB/s
raid6: mmxx2 2728 MB/s
raid6: sse1x1 1175 MB/s
raid6: sse1x2 2416 MB/s
raid6: sse2x1 1882 MB/s
raid6: sse2x2 3004 MB/s
raid6: using algorithm sse2x2 (3004 MB/s)
md: raid6 personality registered for level 6
md: multipath personality registered for level -4
md: faulty personality registered for level -5
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
device-mapper: dm-multipath version 1.0.4 loaded
device-mapper: dm-round-robin version 1.0.0 loaded
ip_conntrack version 2.4 (8192 buckets, 65536 max) - 200 bytes per conntrack
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
NET: Registered protocol family 5
Starting balanced_irq
Using IPI Shortcut mode
Freeing unused kernel memory: 240k freed
squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
aufs 20070903
attempt to access beyond end of device
loop0: rw=0, want=66, limit=8
isofs_fill_super: bread failed, dev=loop0, iso_blknum=16, block=32
attempt to access beyond end of device
loop0: rw=0, want=68, limit=8
attempt to access beyond end of device
loop0: rw=0, want=1252, limit=8
attempt to access beyond end of device
loop0: rw=0, want=1028, limit=8
UDF-fs: No partition found (1)
XFS: bad magic number
XFS: SB validate failed
Vendor: USB Model: DISK 2.0 Rev: 0828
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sda: 1966080 512-byte hdwr sectors (1007 MB)
sda: Write Protect is off
sda: Mode Sense: 43 00 00 00
SCSI device sda: 1966080 512-byte hdwr sectors (1007 MB)
sda: Write Protect is off
sda: Mode Sense: 43 00 00 00
sda: sda1
sd 0:0:0:0: Attached scsi removable disk sda
usb-storage: device scan complete
UDF-fs: No VRS found
XFS: bad magic number
XFS: SB validate failed
UDF-fs: No VRS found
XFS: bad magic number
XFS: SB validate failed
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-0, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
attempt to access beyond end of device
dm-1: rw=0, want=66, limit=8
isofs_fill_super: bread failed, dev=dm-1, iso_blknum=16, block=32
attempt to access beyond end of device
dm-1: rw=0, want=68, limit=8
attempt to access beyond end of device
dm-1: rw=0, want=1252, limit=8
attempt to access beyond end of device
dm-1: rw=0, want=1028, limit=8
UDF-fs: No partition found (1)
XFS: bad magic number
XFS: SB validate failed
UDF-fs: No VRS found
XFS: bad magic number
XFS: SB validate failed
UDF-fs: No VRS found
XFS: bad magic number
XFS: SB validate failed
UDF-fs: No VRS found
XFS: bad magic number
XFS: SB validate failed
UDF-fs: No VRS found
XFS: bad magic number
XFS: SB validate failed
attempt to access beyond end of device
dm-6: rw=0, want=386, limit=384
isofs_fill_super: bread failed, dev=dm-6, iso_blknum=96, block=192
UDF-fs: No VRS found
XFS: bad magic number
XFS: SB validate failed