Volume manager can not use added space

[pvinne]

Hello,
we have the same issue with a 3Ware 9650-SE 12-port Controller. We had 6x1TB in a RAID 6, added 3x1TB, waited for the controller to finish the resize and then did the pv resize. Now i see 6519GB in the volume manager, but cannot assign the space to the existing logical drives nor can i create new drives - the slider is just fixed. Same after 2 reboots.
Is there any solution to this?

[To-M]

Send in a request to support@open-e.com with logs and and ask for remote support - i want them to look into this.

[silicon]

Any update on this one, as we have just seen the same thing on a LSI MegaRaid controller.

It took a couple of reboots (after the pv resize) just to get the new size to report correctly in Unit size, but as above posts, free space is still incorrect. I have submitted logs to support anyway (Ticket#1010974), this post is just say it's not a 3ware etc. Raid controller-specifc issue. Cheers.

[HangaS]

I have the very same issue here.
A disk was added to the array and with some console command I was told to run, the total volume space reflects the new size. However the sum of the used and free space still add up only to the previous volume size.

[To-M]

Did you send in the log file to support and what RAID controller are you using.

[HangaS]

No, 'cos meanwhile I had another problem with lost tape pools and that was a less important issue. I'll open a ticket for this issue together with log files.

[Arcesilaus]

Does anybody already know the solution for this issue?

I've just expanded my Areca 1222 array, succesfully resized the PV and rebooted.
The volume manager does show the correct, expanded, size, but the free space indicator is stuck at exactly the old volume size.

[deragoku]

The disk is added to the array, I was told to run some console commands.

[To-M]

The raid controller is an ARC-1680 and the controllers reports complete on the array expansion moreover: the volume manager reports 11000Tb.

Are you saying that your Areca is having the same issue? Try the PV-Resize from the Extended tools in the Console Screen enter CTRL + ALT + X then select PVresize.