Hi folks,
my backupstorage was faulting, so i had to replace the mainboard. When i look at the network configuration in open-e i see that my network adapters have changed
before the hardware fail it was:
eth0 - 4port NIC - Intel Corporation 82571EB Gigabit Ethernet Controller
eth1 - 4port NIC - Intel Corporation 82571EB Gigabit Ethernet Controller
eth2 - 4port NIC - Intel Corporation 82571EB Gigabit Ethernet Controller
eth3 - 4port NIC - Intel Corporation 82571EB Gigabit Ethernet Controller
eth4 - onboard - Intel Corporation 82574L Gigabit Network Connection
now it is:
eth0 - 4port NIC - Intel Corporation 82571EB Gigabit Ethernet Controller
eth1 - 4port NIC - Intel Corporation 82571EB Gigabit Ethernet Controller
eth2 - 4port NIC - Intel Corporation 82571EB Gigabit Ethernet Controller
eth3 - 4port NIC - Intel Corporation 82571EB Gigabit Ethernet Controller
eth5 - onboard - Intel Corporation 82574L Gigabit Network Connection
there is no sight of eth4, what is the problem now? I´m not able to connect to the internet over eth5, the system says my dns-settings are wrong which is not the case.
How can i revert back to my original network configuration?
Thanks in advance