Hi!

As discussed some weeks ago here in the forum, I want to switch from USB stick as boot media to a SATA Flash-Disk.
I wanted to make this switch this weekend, but I have some questions to be answered before!

Current setup is like this:
2 GB USB stick as boot media
2 TB RAID 10 connected to 3ware 9650SE-8LPML

After the switch it should be like this:
4 GB SATA flash-disk as boot media
2 TB RAID 10 connected to 3ware 9650SE-8LPML

What is the best way to switch to a different boot media now?

1. Save config from current boot media (via WebGUI)
2. Connect new SATA flash-disk to a different PC and install Open-E from booted CD-ROM
3. Shutdown Open-E with USB stick
4. Pull USB media, connect new SATA flash disk
5. Boot Open-E and configure network via console
6. Connect from PC via WebGUI and load new settings (saved in step 1)
7. Reboot. Done.

Is that way correct?
Does the newly installed Open-E assign old settings correct to the appropriate disks?

Regards,
prahn