Hy,

May be somebody could help me...

On my ARECA 1680 i have two volume : 10*400Go SAS RAID6 and 4*2To SATA RAID10.
I have some random error on my SATA Volume (never on my SAS volume or at same time for SATA) :

2013/05/10 09:02:03|[83999.590082] scsi cmnd aborted, scsi_cmnd(0xffff880008c24200), cmnd[0x28,0x 0,0x5a,0x7c,0x97,0xb8,0x 0,0x 1,0x 0,0x 0,0x 0,0x 0], scsi_id = 0x 0, scsi_lun = 0x 1.
2013/05/10 09:02:03|[83999.590216] scsi cmnd aborted, scsi_cmnd(0xffff88011cad8940), cmnd[0x28,0x 0,0x5a,0x7c,0x98,0xb8,0x 0,0x 1,0x 0,0x 0,0x 0,0x 0], scsi_id = 0x 0, scsi_lun = 0x 1.
2013/05/10 09:02:03|[83999.590344] scsi cmnd aborted, scsi_cmnd(0xffff88012525f580), cmnd[0x28,0x 0,0x4a,0x86,0x 9,0xa0,0x 0,0x 0,0x10,0x 0,0x 0,0x 0], scsi_id = 0x 0, scsi_lun = 0x 1.
2013/05/10 09:02:03|[83999.590478] arcmsr1: executing eh bus reset .....num_resets = 0, num_aborts = 3

The ISCSI attached to SATA Volume goes offline and i have to reboot whole system to get back every thing...

If i check Areca Status, no error in log, everything is ok...

I disable NCQ for Sata without luck.

I have latest firmware from ARECA.

What can i do ?

PS : my support expired 14 April 2013 on my both Open-E...

Thanks

Nsc