This is a rookie mistake, but I'm unable to connect to target0 using Microsoft V2 of iSCSI Initiator. This is my first experience using the product. Here's my configuration: Posted here as your mail server is down.
*** System Configuration ***
Wndows Server 2003 SP1 Current
NIC 1 192.168.1.6
NIC 2 192.168.2.6
*** iSCSI R3 Enterprise Setup ***
Version: 2.30 build 2820
Target0 Volumes iv0000, iv0001
Target0 name iqn.2007-10:raid:target0
Bond0 192.168.1.30
Bond1 192.168.2.30
CHAP username NTFS
CHAP password 12345612345601
Target IP Access 192.168.1.6;192.168.2.6
*** iSCSI Initiator properties ***
General tab - Secret 12345612345699
Discovery tab 1 192.168.1.30 port 3260
Discovery tab 2 192.168.2.30 port 3260
Discovery Advanced (2 separate entries)
Local Adapter Microsoft iSCSI Initiator
Source IP 192.168.1.6. 192.168.2.6
Target portal Grayed out (is this a problem?)
CHAP logon information Checked
Username NTFS
Target secret 12345612345601
*** Result Authentication failure ***
I'm stumped. Thank you,
Ted Gage AKA TedMac
Chief Engineer,
North Texas Fusion Center