Demo CD not working

[secdes]

I redownloaded the file and while it says its downloading a 270MB file I only get 146MB

I checked the MD5 key and its different.
key for one downloaded is 6decec04537927c562a530981c8f533

The system is a Xeon Dual core, 2Gb Ram, Dual 1Gb Intel Nics, Supermicro MB with IDE and 3ware 9550 16 port SATA Raid

If you can give me a direct link to the download I will try it

[To-M]

I will check this out to see if there is an issue and get back to you today on this. Please try again sometimes there might be some routing issues.

[To-M]

I wanted to follow up with you on the download issue. I experienced the same problem as well. I would suggest trying again later, as work is being done on the server or there could be a temporary routing problem.

[secdes]

I was able to get it downloaded - Now when it boots I don't get an option to change the network cards. This Motherboard combo worked great for the iscsi cd. I have the supermicro x7dbe-o board with 2 onboard intel gig nics. The hardware display at the console show 2 Intel 631xESB/632xESB DPT Lan Controller Copper Rev (1) nic's

Any Ideas?

[To-M]

This will also be updated in our next release from the Supermicro X7DVL-E-O
and the Supermicro X7DVL-E-O motherboard as we are seeing more of these in the market. You are definitely working on all the hits!
We appreciate this kind of due diligence.
Thank you!

[secdes]

So should I wait for an updated build?

[To-M]

I would and for other ideas I would contact the North America support line - you will reach a human speaking engineer (770) 881-7680 .