Demo CD not working

[To-M]

I wanted to follow up with you on the download issue. I experienced the same problem as well. I would suggest trying again later, as work is being done on the server or there could be a temporary routing problem.

[secdes]

I was able to get it downloaded - Now when it boots I don't get an option to change the network cards. This Motherboard combo worked great for the iscsi cd. I have the supermicro x7dbe-o board with 2 onboard intel gig nics. The hardware display at the console show 2 Intel 631xESB/632xESB DPT Lan Controller Copper Rev (1) nic's

Any Ideas?

[To-M]

This will also be updated in our next release from the Supermicro X7DVL-E-O
and the Supermicro X7DVL-E-O motherboard as we are seeing more of these in the market. You are definitely working on all the hits!
We appreciate this kind of due diligence.
Thank you!

[secdes]

So should I wait for an updated build?

[To-M]

I would and for other ideas I would contact the North America support line - you will reach a human speaking engineer (770) 881-7680 .

[To-M]

I have an update for your Supermicro on the NIC issue. Please email me at todd.maxwell@open-e.com so I can send this to you.

[Triangle]

Hi,

You can try using other burning soft such as ISO-burner. This is a small yet reliable and very easy to use tool. I suppsoe you will find it really useful
http://www.ntfs.com/iso-burning.htm

[priyam]

Hello .. i have a problem.. Using the burn from linux I boot the server (the same server will boot the iscsi-ent demo cd) it hangs at the Open-e graphic and will not continue from there. any idea?