canot change NTP and Time Zone

[Han]

Had the same issue. Reported it to support. They sent me a small update that fixes the issue.

Han.

I have only used Open-E for ISCSI in the past and I elected to try the free version to demo the NAS features.

[dlusk]

I will try again. Did you just use the "support form" on the web sight

Don

[gilly05]

I will try again. Did you just use the "support form" on the web sight

Don

I just emailed support requesting help on the issue. I referenced this thread and mentioned that someone got a fix. I will post if/when I get a response.

Thanks,
Kyle

[kaspars]

We have trying connect DSS trial to AD long time. And finaly find that problem is exactly same - wrong time zone. And we can not change from default. Trial failed. We will look for some other storage software.

[NASUK]

I had the same problems when I installed a system using Build 3719.

Support sent me an update which returned "Wrong Product Update", but when they realised I was using the Lite version they sent me an alternative update.

This worked a treat.

Whilst I don't seem to be able to attach them here, I have uploaded both to an area of my website - hopefully this will help others with the same issue.

For DSS Lite: http://www.nas.uk.com/OpenE/upd_0559-DSS_V6Lite.zip
For DSS (trial - untested by me): http://www.nas.uk.com/OpenE/upd_2009_9_9_2.zip

Simple instructions
1.Extract the UPD file to your local system
2.Login to the DSS GUI
3.Navigate to MAINTENANCE - SOFTWARE
4.Select the UPD file and select Apply
5.Reboot the server

Hope this helps.

[Shervin]

Support do you have an update for the version version 6.0up10.8101.3719 64bit so that it will permit me to update Time Zone settings

[Shervin]

Tried to create a support email but loops between the support website's steps 4 and 5